• We recommend asking a second person to help with the installation. This person
can hold the monitor still, for example, while you are attaching the monitor to the
monitor holder.
• Apply your full concentration when carrying out the installation, because if the
monitor and/or monitor holder were to fall, this could cause expensive damage to
the equipment and there is the potential danger of personal injury!
• Lay all the monitor's cables in such a way that they do not get jammed or kinked
in the monitor holder.
•
Check all the screw fittings from time to time. Adjusting the position of the monitor
and/or the monitor holder and moving them can sometimes cause the screws to
become loose over time.
• Do not exert any force when moving/adjusting the monitor and/or monitor holder,
as this could damage the monitor.
• Do not apply pressure to the monitor screen when moving/adjusting the stand!
• Do not overload the monitor holder. Observe the technical data related to the
maximum monitor weight and/or its size.
• Do not use the monitor holder to support yourself or to hold onto.
•
Do not fix any objects to the monitor holder other than the monitor for which it
was intended.
•
If you are in any doubt, do not install the product yourself; ask a qualified technician
to do it for you.
• Wall-mounting is permissible only where the wall concerned is of the correct type
and condition. Lightweight partition walls or those made from gypsum boards are
normally unsuitable. However, special dowels are sometimes available for these
types of surfaces. If in doubt, contact a specialist before assembling the product.
Depending on the base material (e.g., concrete), suitable mounting materials must
be used (screws, dowels, etc.).
Due to the weight of the monitor and monitor holder and the lever action involved,
ensure that screws are fixed securely.
• Plan the installation location carefully, so that the monitor holder with the monitor
fixed to it will be situated at the correct height when you have finished.
• Use a spirit level to assist you with mounting the monitor holder on the wall
correctly.
• Ensure that no cables or wires are damaged when drilling holes or tightening
screws. Accidentally drilling into electrical cables can cause a fatal electric shock!
Look after your own safety when using electric tools (e.g. a drill).
• Make sure that no persons are underneath the monitor holder and/or monitor.
• Consult a technician if you are not sure how to use or connect the product.
•
Maintenance, modifications and repairs must be done by a technician or a
specialist repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Disposal
Always dispose of the product according to the relevant statutory regulations.
Technical data
Suitable screen size ..................... 94 – 152.4 cm (37 – 60 in)
Load capacity ............................... max. 20 kg
VESA standard ............................. 200 x 200, 300 x 200, 300 x 300, 400 x 200, 400 x 300,
400 x 400, 600 x 400
Tilt angle ....................................... 0 to -10°
Material thickness ......................... 2 mm (wall plate), 1.5 mm (arm)
Dimensions ................................... 730 x 625 x 85 mm
Weight .......................................... 13 kg
Important information
TV Wall Holder “SLIDE” SP-TVW-SLIDE01
Item no. 1620641
Intended Use
The product is designed for mounting a television on a wall.
For safety purposes, you must not rebuild and/or modify this product. Using the product for
purposes other than those described above may damage the product. In addition, improper
use can cause injuries and property damage. Please read this document carefully and keep it
in a safe place. Only make this product available to third parties together with this document
and the installation instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
Safety information
Read the safety instructions carefully. We accept no liability for personal
injuries or damage to property arising due to failure to follow the safety
instructions and the included installation instructions. Such cases will
invalidate the warranty/guarantee.
• A monitor holder is not a toy. Therefore, keep the product out of the reach of
children.
• Do not leave packaging material lying around carelessly. It may become a
dangerous toy for children.
• Installing the product in an unsuitable location may lead to personal injury or
damage to property!
• Proceed with care when assembling and mounting the product! The product has
sharp edges which have the potential to cause injury!
• Carry out only the work on the monitor holder that is necessary in order to install
it. Never dismantle the monitor holder and never attempt to convert it or to repair
it in any way. Dismantling a monitor holder in the wrong way could cause severe
injuries!
• Before beginning the installation process, check whether there are appropriate
mounting options for a monitor holder on the back of your monitor.
• It is usually necessary to remove the monitor's base before mounting the monitor
on a monitor holder. Refer to your monitor’s operating instructions for details.
Place your monitor on a soft, clean surface with the screen facing down to ensure
that there is no pressure on the screen and to prevent the screen from getting
scratched.
Protect valuable furniture using a suitable pad or cloth.
Remove the existing monitor stand; depending on the design, this will either be
screwed or clipped in.
•
When fixing the monitor holder to the back of the monitor, make absolutely certain
that you use the correct screws. The thread on the screws must match the screw
holes on the monitor and must not be too long, otherwise the monitor may be
damaged.
The screws must not be too short, otherwise the product will not attach to the
monitor properly. The screws must be screwed into the threaded fixture holes on
the monitor with at least 5 full 360° turns.
The screws are usually included with the monitor, but you may need to purchase
other screws (depending on your monitor) from a specialist retailer.
Do not use any force when tightening the screws, otherwise you may damage the
monitor and void the warranty!
If you are not sure about the correct screw length, contact the monitor manufacturer
or an appropriate specialist.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE.
*1620641_v1_0318_02_IPL_hs_en