G
O P E R AT I N G I N T R U C T I O N S
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
Table Mount for Dual LCD Monitor arm
Item no. 416082
Intended use
The product is used to mount two LCD monitors with “VESA wall mount system” (75 mm or 100 mm) and a
maximum weight of 8 kg of each monitor to a table.
For safety reasons, you may not convert and/or alter the product. If you use the product for purposes other
than those described above, the product may be damaged. Please read the operating instructions carefully
and do not discard them.
If you pass the product on to a third party, please hand over these operating instructions as well.
This product complies with the applicable national and European requirements. All names of companies and
products are the trademarks of the respective owners. All rights reserved.
Package contents
• See part list of the provided original manufacturer’s instructions
• Operating instructions
Safety i
nstructions
T
he warranty will be void in case of damage caused by failure to observe these operating
instructions. We do not assume any liability for any resulting damage.
We do not assume any liability for material and personal damage caused by improper use
or non-compliance with the safety instructions. In such cases, the warranty will be null
and void.
The exclamation mark symbol indicates that important information is included in these
operating instructions.
The arrow symbol indicates tips and notes.
Persons/product
• Do not overload the monitor arm. Pay attention to the details provided by the manufacturer for the maxi-
mum monitor weight.
• Fasten the monitor arm only at a sufficiently stable table top/table. Tables made of glass, ceramic or thin
plastic-coated wooden-fibre slabs, are categorically unsuitable for attachments. Furthermore, you must
not attach the monitor arm to shelves or similarly unstable or unsteady surfaces. Selecting an unsuitable
mounting location can lead to personal or material damage.
• Check the screw connections of the table mount, monitor arm and monitors from time to time. Adjusting
the position of the monitor arm and the monitors and moving them can sometimes cause the screws to
become loose over time.
• Fasten the monitor arm only in suitable locations. Observe the strong lever action of the monitor arm.
• Do not exert any force when moving/adjusting the monitor, as this could damage the monitors.
• When moving/adjusting, do not press on the monitor screens.
• When mounted to a table, the monitor arm and the monitors should always be above the table surface for
safety reasons.
• Do not use the monitor arm to support yourself or to pull yourself up.
• Use suitable mounting material when mounting the product to a wall. Furthermore, the construction of the
wall must be suitable for wall mounting. If you do not have the required specialist knowledge, contact an
expert or a specialist workshop.
• Make certain when mounting the product on a wall that nobody is situated in the area underneath the
monitor arm.
• The product is not a toy. Keep out of the reach of children and pets.
• Do not leave packaging material carelessly lying around. It may become a dangerous plaything for chil-
dren.
• Never expose the product to any mechanical stress.
Miscellaneous
• If you have doubts about operation, safety aspects or mounting of the product, consult a trained technician.
• Maintenance, adjustment and repair work may only be carried out by an expert or a specialist workshop.
• If you have any questions,that are not answered in these operating instructions, please contact our techni-
cal customer service or another specialist.
Part list
see part list of the provided original manufacturer’s instructions
Version 04/15
Table-mounting
Carry out only the work necessary to mount (or adjust) the monitor arm. Never perform
any conversion or repair work.
Work carefully during mounting, as falling of monitors and monitor arm not only leads to
expensive following damage but also to an increased injury risk!
Lay all the cables of the monitors in such a way that they do not get jammed or kinked in
the monitor arm.
Proceed with care when assembling and mounting the product. The product may have
sharp edges. There is a risk of injury!
You can find detailed images for mounting and adjusting of the screws in the original manufac-
turer’s instructions provided.
You may need a cross-head screwdriver (not included in the delivery) to tightent the cross-head
screws.
Do not scratch the surface of your table during assembly! If necessary, use a protection mat,
blanket or several layers of thick newspaper.
The assistance of a second person is required to mount the monitors to the monitor arm. He/She
must hold the monitors while you attach them to the holder.
Image 1:
• Depending on the thickness of your table, select two mounting holes to attach the screw clamp (C) to the
stand rod (A). Always select the pair of holes that are at the same height.
• Tighten the screw clamp (C) to the lower part of the stand rod (A) using the hexagon screws (F). To do this,
use the hexagonal spanner (D).
• Attach the screw clamp (C) at the edge of the table. Make sure that the table is stable and the mounting
surface is even.
Options A1 and A2:
• The monitor holders can be rotated on the cross beam as shown in the images depending on the size of
the monitor and the desired distance between the monitors.
• If you would like to change the alignment of the monitor holders in the cross beam, loosen the knurled
screws, rotate the monitor holders and then slide the cross beam back into place.
Image 4:
• Place the cross beam (B) on the stand rod (A). Please pay attention to the correct alignment. The arrow
must point upwards and you should be able to read the word “UP”.
• Adjust the cross beam (B) to the desired height and fasten it to the stand rod (A) with two hexagonal
screws (H). To do this, use the hexagonal spanner (D).
• Place the decorative caps (I) on the stand rod (A).
Image 5:
• Fasten the two monitors to the respective monitor holder of the cross beam (B). To do this, use the cross-
head screws (G) and observe the correct alignment.
Image 6:
• Set the desired distance between the monitors and tighten the two monitor holders with the knurled
screws.
Adjusting the view angle:
• The monitor holders can be tilted and rotated.
• To adjust the joints, the decorative caps must be removed first.
• Loosen the respective adjustment screw with the spanner (E) until the joint can be moved.
• Set the desired angle and then tighten the adjustment screw.
• Re-attach the decorative cap.
• The connection cables of the monitors can be fixed to the cross beam (B) using cable clamps.
Technical Data
Suitable screen sizes ...................33 - 61 cm (13 - 24“)
Bearing capacity ..........................2 x max. 8 kg
Thickness of table top ..................max. 10 cm
VESA standard ............................75 x 75 mm / 100 x 100 mm
Dimensions (W x H x D) ..............94,5 x 68 x 21,5 cm
Weight .........................................approx. 10 kg