• Do not touch the power adapter if there are any signs of damage, as this may
cause a fatal electric shock!
Switch off the mains voltage to the mains socket containing the mains adapter
(switch off at the corresponding circuit breaker or remove the safety fuse, and then
switch off at the corresponding RCD protective switch to ensure the mains socket
is completely disconnected from the mains voltage).
Only then remove the mains adapter from the mains socket. Dispose of the faulty
mains adapter in an environmentally friendly manner and discontinue use. Re
-
place it with an identical mains adapter.
c) Operation
• The product is only intended for use in dry indoor locations. No part of the product
should become damp or wet; never handle it if your hands are wet!
With the wall plug transformers there is also the deadly peril of an electric shock!
• Choose a stable, even, flat and sufficiently large surface to set up the transmit
-
ter/receiver module. Valuable furniture surfaces must be protected from dents or
scratches with a suitable underlay.
• Never use the product immediately after it has been taken from a cold room into to
a warm one. This may cause condensation to form, which can destroy the product.
With the wall plug transformers there is also the deadly peril of an electric shock!
Allow the product to reach room temperature before connecting it and putting it
into use. This may take several hours.
• Make sure the cables are not bent or jammed when installing the product.
Connections and product overview
Transmitter module ‘TX’
1 Antenna
2 HDMI in
3 HDMI output
4 USB Socket
5 Jack for external IR
transmitter
6 Micro USB socket
for voltage/power supply
Receiver module ‘RX’
7 Antenna
8 IR receiver
9 USB connection for
keyboard/mouse
10 HDMI output
11 Micro USB socket for voltage/power supply
Installation location and range
If possible, you should perform a function test first. When doing this, the distance
between the transmitter and receiver module should only be a few metres. Only
when signal transmission works correctly should you place the devices at their final
installation locations. This way, you can ensure that only the installation location
causes the problems and not, for example, a low-quality HDMI cable.
The wireless set provides wireless transmission of an HDMI-compatible AV signal (see chapter
‘Technical data’ for resolutions). The product uses 5 GHz wireless technology based on WLAN
(802.11ac).
Position the transmitter and receiver modules so that they are unobstructed. Do not place them
behind other devices (e.g. behind a TV set) as this will shield the wireless signal and prevent
connection (or the range will only be very short). Do not place the transmitter and receiver
modules next to other wireless products (e.g. internet routers, repeaters, etc.).
For a long range, there should be as few walls/furniture etc. between the transmitter and re
-
ceiver modules as possible, as this will greatly reduce the range.
The transmission range of the wireless signals between the transmitter and receiver modules
is up to 200 m with a direct line of sight under optimal conditions.
Due to different influences on the wireless transmission, this value cannot be achieved in build
-
ings. Try to change the orientation of the antennas; if necessary, select a different installation
location for the transmitter and receiver modules. Reduce the distance between the devices,
use for example a longer (and high-quality) HDMI cable.
Use a suitable underlay to protect valuable furniture surfaces from dents, scratches or discol
-
ouration.
Operating instructions
HDMI wireless set
Item No. 2373310
Intended use
This product enables the wireless transmission of HDMI-compatible digital AV signals (resolu
-
tion to 1080p60) from a playback device (e.g. satellite receiver, computer, media player, games
console) to a receiver (e.g. television/monitor).
The voltage/power is supplied via two enclosed wall plug transformers.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product
for purposes other than those described above may damage the product. In addition, improper
use can cause hazards such , as a short circuit, fire or electric shock. Read the operating
instructions carefully and store them in a safe place. Only make this product available to third
parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and prod
-
uct names contained herein are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Delivery content
• Transmitter module
• 3x USB cable
• Receiver module
• IR transmitter
• 2x mains adapters
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Description of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g., due to an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
Safety information
Read the operating instructions carefully and observe in particular the safety
instructions. If you do not follow the safety information and information on
proper handling in these operating instructions, we will assume no liability for
any resulting personal injury or damage to property. Such cases will invalidate
the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a danger
-
ous toy for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. Safe operation of the appliance can no longer be guaranteed if
it shows visible signs of damage, malfunctions, has been exposed to unfavourable
storage conditions or significant transport loads.
• Always observe the safety information and operating instructions of any other de
-
vices which are connected to the product.
• Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
• Maintenance, modifications and repairs must be carried out by a technician or a
specialist repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Mains adapters
• The design of both mains adapters complies with protection class II. Use only
standard mains sockets as the power source for the mains adapters.
• The mains adapter must be plugged in an easily accessible mains socket.
• Only use the included mains adapter to power the product.
• Do not remove the mains adapter from the mains socket by pulling the cable. Grip
the sides of the plug, and then remove the plug from the mains socket.
