Caution:
• To avoid damaging the components, do not attempt to open or repair the product
without professional guidance.
• The operating range may be affected by environmental factors and nearby
sources of interference.
• Proper use helps to prolong the lifespan of the product.
b) Connected devices
Also observe the safety and operating instructions of any other devices which are
connected to the product.
Features
• Easy to use plug-and-play design
• Integrated HDCP decryption/encryption engines, compliant with HDCP Rev 1.4/2.2
specification
• Wide frequency range of 25-600 MHz
•
Supports HDTV resolutions up to 4K @ 60 Hz
• Supports LPCM 7.1CH and DTS-HD Master Audio
• Supports Full 3D
Operating elements
3
4
5
1
2
OUTPUT 2
OUTPUT 1
INPUT
4K@60HZ/HDCP 2.2
1x2 HDMI 2.0 Splitter
HDMI OUTPUT 1 HDMI OUTPUT 2
5V 0.5A
1 Link LEDs
These LEDs illuminate when the HDMI outputs are connected to the display.
2 Input LED
The input LED will illuminate when the splitter is connected to an HDMI source.
3 HDMI Output
Connect each of the output ports to the HDMI display for simultaneous HDMI distribution.
4 Power
Connect the 5 V/DC power supply to the splitter and plug the adapter into an AC wall outlet.
An external power source is only needed when there is not enough power from the HDMI
source.
5 HDMI Input
Connect the input port to the HDMI output on your source device, such as a DVD player
or set-top box.
Operation
In
DVD
HD TV
HD TV
Out
a. Connect the input port of the HDMI splitter to the HD source.
b. Connect the HDMI cables from your displays (such as a monitor or projector) to the HDMI
splitter’s outputs.
c. The HDTV signal will then be distributed to each HDTV display.
Note: When displaying a 3D signal with a higher bandwidth than 225 MHz or a 4K2K resolution
source, a High-Speed HDMI cable is required.
Care and Cleaning
• Disconnect the product from the mains before cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol, or other chemical solutions as
they can cause damage to the housing and functioning of the product.
•
Clean the product with a dry, fibre-free cloth.
Operating Instructions
1x2 HDMI splitter
Item No. 2360877
Intended use
This 4K Pro 1x2 HDMI splitter with HDCP 2.2 distributes a single HDMI source to two HDMI
displays. It supports resolutions up to 4K@60Hz and delivers up to 18 Gbps bandwidth for an
optimal 4K picture.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you
use the product for purposes other than those described, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Delivery content
• HDMI splitter
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave the packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases, steam, and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts, or a fall, even from a low
height, can cause damage to the product.
• Consult an expert when in doubt about the operation, safety, or connection of
the appliance.
•
Maintenance, modifications, and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions that remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
