32
10. Using the remote control
Do not operate the ceiling mount until you have finished mounting it in accordance with the instructions.
Only adjust the mount using the built-in motor, otherwise the moving mechanism may become entangled
or incorrectly stowed.
1
4
2
6
8
11
9
10
12
7
5
3
1
mem1
button
2
1
button
3
OK
button
4
button (no function)
5
button
6 LED
7 IR LED indicator
8 SET button
9
button (no function)
10 button
11
2
button
12
mem2
button
a) Upward / downward movement
1. Clear all obstacles within the range of motion before adjusting!
2. Press the button
(5)
to move the mount up to the lowest profile position against the ceiling.
3. Press the button
(10)
to move the mount down to the max. tilt angle 75° (default).
Press the
OK
button (3) to stop the mount from moving.
b) Memory setting
1. Adjust the mount to the desired position.
2. Press and hold
mem1
or
mem2
until you hear a beep.
3. The position is saved.
c) Recall memory
• Press the
1
or
2
button and the mount will automatically go to the saved position.