SPE MS230-1 Operating Manual Download Page 15

13 

MS230-1 

MULTISRIPPER 

Operating Manual 

CONDITIONS OF SALE 

 

The quotation overleaf and any order placed following such quotation are subject to the following conditions of sale in which SPE 
International Limited is referred to as the “Company”. 

1. 

Validity of quotation 

No order received from a customer by the Company shall constitute a contract until accepted in writing by the Company. 

2. 

Prices 

Prices quoted by the Company are firm for 30 days only or until previously withdrawn. Unless otherwise stated all prices are exclusive 
of any applicable Value Added Tax for which the customer shall be additionally liable to the Company. 

3. 

Delivery 

Delivery periods and dates are given in good faith but are not the subject of any warranty or condition and time shall not be of the 
essence of the contract in these respects. No liability will attach to the Company if delivery periods or dates are not met for any 
reason whatsoever. 

4. 

Payment 

Save as may otherwise be agreed in writing the customer shall pay the price in full on or before the estimated delivery date 
whereupon the Company shall raise a receipted invoice. Each invoice includes an Overdue Account Levy of 5% of the total invoice 
value inclusive of VAT. Subject to payment in full being made on or before the due date a sum equal to the Overdue Account Levy 
shall be credited to the customers account with the Company. Until such time as payment in full has been made the Company shall 
be under no obligation to allow or effect of any goods to the customer. 

5. 

Warranty 

The Company warrants that all goods supplied by it will correspond to their specifications and will be free from defects in materials or 
workmanship for a period of 12 months from the date of delivery. The Company’s obligation in the event of a breach of this warranty 
is limited to the repair or replacement of any defective goods which shall be returned at the cost and expense of the customer to the 
Company. This warranty is given in lieu of all the other warranty or conditions expressed or implied (whether by statute or otherwise) 
and is subject to the following conditions:- 

5.1 

Claims must be notified in writing to the Company within seven days from the date of delivery or (where the defect is not 

apparent on 

reasonable inspection) as soon as practicable after discovery of the defect. 

5.2 

The Company shall be under no liability in respect of any defect in the goods arising from any drawing, design or specification 

supplied by the customer. 

5.3 

The Company shall be under no liability if the defect or failure in the reasonable opinion of the Company arises from wilful 

damage or misuse, negligence by the customer or any third party. Failure to follow the Company instructions, usage of non- 
recommended parts and materials, alteration or repair of the goods without the prior approval of the Company or non-recommended 
maintenance. 

5.4 

The Company shall be under no liability if the price for the goods has not been paid by the due date for payment. 

5.5 

The above warranty does not extend to:- 

5.5.1 

Parts, materials or equipment not manufactured by the company in respect of which the customer shall be entitled only to the 

benefit of any such warranty or guarantee as is given by the manufacturer to the Company. 

5.5.2 

Any component part of the goods or associated parts coming into contact with abrasive elements or dust within surface 

Preparation equipment. 

5.5.3 

Fair wear and tear of moving parts within the goods. 

5.6 

Except in the case of death or personal injury caused by the Company negligence, the Company shall not be liable for any 

consequential loss or damage (whether for loss of profit or otherwise) or other claims for consequential compensation. 

6. 

Carriage 

Packing, carriage and insurance charges in respect of delivery of the goods to the customer will be charged to the customer at cost to 
the company. 

7. 

Damage in Transit 

The company does not accept any liability for loss or damage to the goods while in transit to the customer. 

8. 

Risk 

The risk in the goods shall pass to the customer on delivery to the customer or (if earlier) when possession of the goods is taken by a 
carrier for delivery to the customer. 

9. 

Force Majeure 

The Company shall not be liable to the customer or be deemed to be in breach of any contract with the customer by reason of any 
delay in performing or any failure to perform any obligation of the Company obligation in relation to the goods if the delay or failure 
was due to force majeure or to any other cause beyond the 

Company’s reasonable control. 

10.  Reservation of Title 

The goods sold under these conditions shall remain the absolute property of the Company and legal title in the goods shall remain 
vested in the Company until payment in full of all amounts invoiced or due to the Company in respect of the goods. If the customer 
shall enter into liquidation have a winding up order made against it or have a Liquidator, receiver, administrator or administrator 
receiver shall be appointed over its assets, income or any part there of before the property in the goods has passed in accordance 
with this condition the Company shall be entitled immediately after giving notice of its intention to repossess any goods to enter upon 
the premises of the customer with such transport as may be necessary and to repossess any goods to which it has title under this 
condition. No liquidator, receiver, administrator or administrative receiver of the customer shall have authority to sell goods to which 
the Company has title without the prior written consent of the Company. 

11 

Insolvency of Customer 

If the customer being a body corporate, shall pass a resolution or suffer an order of the Court to be made for winding 

– up, or if a 

Receiver, Administrator or Administrative Receiver shall be appointed or, being an individual or partnership, shall suspend payment , 
propose or enter into any composition or arrangement with his or their creditors, or have a bankruptcy order made against him or 
them, then the Company shall have the right, without prejudice to any other contract with the customer, not to proceed further with the 
contract and shall be entitled to charge for work already carried out ( whether completed or not) and for goods and materials already 
purchased for the customer such charge to be an immediate debt due from the customer. 

12.  Patent Rights, etc 

The acceptance of a quotation includes the recognition by the customer of the Company under any patents, trademarks, registered 
designs or other intellectual property rights relating to the goods and the customer undertakes that patent numbers, trademarks or 
other trade markings on goods supplied shall not be obliterated, altered or defaced. 

13.  Applicable Law 

These conditions shall be governed by and construed in accordance with English law and parties acknowledge and accept the 
exclusive jurisdiction of the English Courts. 

Summary of Contents for MS230-1
















Reviews: