User Manual
CO1-2 Combiner
Page 33 of 36
6.1 Computer Connection.
The easiest way to proceed is to connect the two amplifiers to two different USB ports;
in this way it will be very easy to intervene on one amplifier using the relative keyboard
and the relative display.
If you already have at least one Expert amplifier, installation and knowledge of the
"Term" software is taken for granted.
For any clarification, see the chapter:
“APPENDI
X
–
Remote Control -
“
of the user manual and more specifically the paragraphs:
“
Software Installation
“
“ Us
e of
“Term_USB.exe”
6.2 Selective Addressing.
To use the
XTerm_CO1_2_USB
it is necessary to associate each of the two Experts
with a different relative address to a well-defined USB port of the PC.
This setting, based on a simple self-recognition maneuver, must be performed only
once and in any case with the amplifiers previously placed in the "
OFF-LINE
" position
(refer to the following pictures, as a pure example, with the use of an EXPERT 1.5K-
FA).
