4
GETTING STARTED
1. The unit requires 3
×
1.5V AA batteries. Open the battery compartment cover and insert the
batteries in the right polarity, then close the cover (Proposal using alkaline battery). There
should be time display on the liquid crystal screen after the batteries are inserted.
2. Insert one end of the line cord to the line jack of the base and the other end to the wall outlet
of exchange.
3. Connect the handset and the unit with coiled cord.
4. Setting the dialing mode to correct mode according to the directions from your local telecom.
5. Apply for the caller ID from your local telecom office.
RECEIVING A CALL
1. When a call comes, the telephone rings, and LCD displays the seq. number of the call, the
date, time, incoming number and
NEW
icon.
2. For repeat incoming calls, LCD displays
REPEAT
icon.
When incoming memory is full, the last incoming number is always replacing the oldest
number.
NOTE: For the phone to display incoming number and other information, you must have
an active Caller ID subscription with your local telephone exchange company.
From handset
1. Pick up the handset and talk to the other party
2. After finished, return the handset to the base.
Switch to speakerphone
1. When talking by handset, press
key and return the handset to the base;
2. After finished, press
key again.
From speakerphone
1. When the unit rings, press
key and talk to the caller. For the other party to hear your
voice clearly, speak into the speaker from a distance of 32cm or less.
2. After finished, press
key again.
NOTE:
Generally telecom transmits the incoming message between the first ring and the second
ring. So please answer the phone after the second ring.
MAKING A CALL
From handset
1. Pick up the handset.
2. When hearing the dialing tone, dial the desired number.
3. The unit starts to time conversation after 6 seconds,
4. After finished, return the handset to the base.
Summary of Contents for 3604N
Page 3: ...3 LOCATION DISCRIPTION...