4.2. Rear Panel
1. HDMI OUT and CO-AX OUT:
Connect the HDMI OUT port to the HDMI input port of your display such as HDTV. Connect
the CO-AX OUT port to the Coaxial (S/PDIF) input port of your amplifier for separate digital
audio output.
2. AUX IN Input:
When the video signal input through the HDMI IN port is from a DVI source such as a PC,
use the AUX IN port to input the audio signal.
3. HDMI IN Input:
Connect the HDMI IN port to the HDMI output port of your source equipment such as DVD
player or Set-Top-Box. Or, use HDMI to DVI cable to connect to the DVI output of your PC.
4. RS-232: Remote Control Port, for AMX or Crestron contol systems
5. PC IN for Video and Audio Input:
Connect the PC IN D-Sub (15-pin) port to the D-Sub output port of your PC. And, connect
the PC IN 3.5mm phone jack to the audio output port of your PC.
6. Y Pb/Cb Pr/Cr Video and L/R Audio Input:
Connect the Y Pb/Cb Pr/Cr (Component) 3 RCA input ports to the Component output port of
your video source equipment such as DVD player or Set-Top-Box. And, connect the L/R
audio input ports to the audio output port of your audio source equipment.
7. CO-AX Input:
The CO-AX port provides the digital audio input support, and can be used to combine with
each video input signals from CV/SV/COMP/PC/HDMI ports. Once connected, please use the
Audio Source Selection in the OSD menu to select between Coaxial (S/PDIF) or other audio
source (see section “4.3 OSD Operation” for reference.)
8. Composite Video / S-Video and L/R Audio Input:
Connect the Composite or S-Video input port to the Composite or S-Video output port of
your video source equipment such as DVD player or Set-Top-Box. And, connect the L/R
audio input ports to the audio output port of your audio source equipment.
9. Power:
Plug the 5VDC power supply into the unit and connect the adaptor to AC wall outlet.