USER’S MANUAL
EN
12
7.1 PROPER COOLING
The unit should be placed stable on a dry and flat surface. Avoid too much slope and slippery
surfaces. Check regularly that the vents (inlet, outlet) are not covered. The minimum distance
between the welder vents and walls should be 50cm.
7.2 MOVEMENT AND HANDLING
When moving the welding machine please take extra care. The device should be moved by using
specially designed transport lugs. If transport handle is damaged, then it needs to be repaired
at an authorized service center.
7.3 DESCRIPTION OF CONSTRUCTION
1
Transport handle
2
Control panel
3
SK socket „+”
4
SK socket „-”
5
Socket: TIG torch control plug
6
Shield gas connector – for TIG torch
7
Unit cover
8
Toggle switch ON/OFF
9
Power cable
10
Shield gas input joint
11
Fan
7
9
3
4
5
8
1
10
11
2
6
