GB
12
• Here are the minimum cross sections of free aperture for additional air
in furniture items:
• Quadra Inside I SL 200 cm²
• Quadra Inside II SL 400 cm²
• Quadra Inside III SL 600 cm²
• The rear ventilation features must be dimensioned appropriately.
• The area below the Quadra Inside housing (housing area) must not be
used as a storage area. Storage area and housing area must be sepa-
rated by a partition floor panel and a back wall.
1
Quadra Inside SL
5
Wall mounting
2
Cover plate / table-top
6
Rear ventilation
3
Housing room
7
Air inlet opening
4
Storage room
• With open table furniture items, always ensure that the apertures in the
underside of the Quadra Inside SL housing are not obstructed by objects.
min.
Example of pull-out cabinet
No objects are permitted
under open table-top
furniture items.
An example of an open table-top furniture
item
