12
6. Handlebar Installation
Insert the Hand Pulse Sensor with Wires (16) through into the hole on the Handlebar Post
(11) and pull them out from the top end of the Handlebar Post (11).
Place the Handlebar (15) through clamp on the Handlebar Post (11) with hand pulse sensors
facing the seat. Hold the Handlebar (15) in desired position and fasten Clamp Cover (19),
Ø12x20x1.5 Spacer (20), and M8x55 Handlebar T-Knob (21) onto clamp. Tighten the
M8x55 Handlebar T-Knob (21) after adjustment.
NOTE: Handlebar T-Knob should be tightly secured before using.
Summary of Contents for magnetic 996
Page 7: ...6 ASSEMBLY INSTRUCTIONS ...
