4
6.
Return to the main screen. If your phone is connected to WiFi, your pictures should appear.
7.
Check the following settings and change if appropriate:
a.
Tap the Menu button.
b.
Tap Mobile Settings.
c.
Under When New Photo is Available, you will probably want Automatically Download set to ON and
Download Only When WiFi is Available set to OFF. If the WiFi setting is OFF, photos will download
regardless of whether you are on WiFi or not, but be aware that photo downloads will use your device’s
data allowance. Thumbnails are typically small, but if you download a lot of them and/or a lot of hi-res
photos, this may be a consideration for you.
d.
Set Photos – Auto Purge Days to your desired value. This is how many days each photo stays on your
device unless you save it.
GoWireless Auto
Step 1: Set up the camera
1.
With the camera in SETUP mode and logged into the network, press the Menu button, navigate to the
Wireless tab and then to Send Via.
2.
Choose GoWireless Auto.
3.
Scroll down to Recipients then press the OK button.
4.
With Email selected, navigate to any entry box, then press the OK button.
5.
Use the keypad to enter up to four destination email address(es). This refers to both regular email addresses
and device email addresses in the carrier’s email format (e.g., 5555551212@ vzwpix.com or
[email protected]). Note: While you can use your phone number email address, that is no longer
recommended because some carriers have begun blocking some MMS messages and senders, which can result
in your not receiving pictures from your camera.
•
Press Del to backspace.
•
Use the arrow keys to navigate to the button containing the letter you want.
•
With the cursor on the button containing the letter, press the OK button multiple times to get the letter you
want. For example, to enter C, with the ABC button highlighted, quickly press the OK button 3 times.
6.
Highlight Save then press the OK button to exit.
7.
Image From: enter the name for your camera that will appear in the From field on the picture email. This will
not appear on the info strip at the bottom of the photo.
8.
Press OK to save your changes.
9.
Press Menu to return to the main menu.
10.
Set the other parameters (Camera, Trigger, System) using the information in the tables in the User Guide. It is
probably best to set the clock last.
11.
Once you have set all the parameters, press Menu to return to the Preview screen.
Step 2: Send a test photo
1.
With the camera in SETUP mode and logged into the network, while in the preview window, press the OK
button to take a photo.
The camera will ask you
Send this photo?
2.
With Yes selected, press the OK button to send.
The camera will show:
Setting…
Sending…
Sent!
3.
Check your phone or email.
For more videos and demonstrations, visit our website
www.spartancamera.com
or call 770-582-0004 Monday through
Friday 9 AM – 6 PM Eastern time. For immediate assistance, you may also email us at
.
