Step 4: Set up the camera on the web portal
1. Go to www.spartancamera.com
and click SIGN IN on the top menu. If you don’t have an
account, follow the steps to register an account.
2. With the camera in SETUP mode and logged into the network, press the
Menu
button, navigate
to the Wireless tab and confirm that
Send Via
is set to
GoWireless Prem
(the default).
3. Scroll down to
Register Camera
then press the
OK
button. A pop up box will show:
Camera registering…
Then you will see:
Module ID/ MEID: xxxxxxxxxxxxxxx
Registration Code: xxxxx
4. Record the Registration Code in the space below. The MEID
should be the same one that’s
on the camera body.
Registration Code: ____________
5. On the portal, go to MY CAMERAS > Management> Add New Camera.
6. Fill in the Camera Description (optional), Module ID and Registration Code, agree to the
Privacy Policy / Terms of Use.
7. Click Add this Camera. Email addresses are optional.
8. Go to MY CAMERAS > Camera Settings, select the camera you just added (if you only
have one camera, it will be selected automatically).
9. Change the camera settings based on your preference. Please make sure you set Camera
Time Zone. You can leave all the rest of the settings default.
10. Click on Schedule a Setting Update and confirm.
11. Go to MY CAMERAS > Management, select the camera you just added. Click Go (left side
of Add New Camera button) to request a camera status.
Step 5: Send a test photo
1. With the camera in SETUP mode and logged into the network, in the preview window,
press the
OK
button to take a photo.
The camera will ask you
Send this photo?
2. With
Yes
selected, press the
OK
button to send.
The camera will show:
Setting…
Sending…
Sent!
3. Check your web account under MY CAMERAS > Manage Photos for the picture. You may
need to refresh your browser.
Step 6: Set up the mobile app
1. On the web portal, follow the steps below to set up both admin and guest access codes:
a. Select MY CAMERAS > Mobile Access.
b. Enter an Admin Access Code and (optionally, if you want to share pictures but not
camera control with guests) a Guest Access Code. You can use different admin and
guest access codes for different cameras or groups of cameras if you want to share
access with different groups of people.
c. Click the Update button.
d. Make a note of your Account ID, the Admin Access Code and the Guest Access Code.
Account ID:
______________________
Admin Access Code:
______________________
Guest Access Code:
______________________
