a.
Any movement of the camera itself will trigger the G-sensor, so that the camera
wakes up and starts the GPS query function. If the query is successful, the Status
Report (including the queried GPS coordinate information) will be sent to the server.
The time required for the query to succeed depends on the current location, the
GPS antenna, and the module itself.
The maximum timeout query is set to 7 minutes. If the query is not successful after
7 minutes, the camera will be shut down.
b.
The Schedule Event 01 will kick in and it will also enable the GPS query function. If
the query is successful, the Status Report (including the queried GPS coordinate
information) will be sent to the server.
The maximum timeout period of the query is 3 minutes. If the query is not
successful for 3 minutes, the Status Report will still be sent to the server.
Note: Since the antenna is unplugged, the Status Report cannot be guaranteed to be successful
although the test results were successful.
2.3. The embedded SIM card is removed.
No can do.
