HYDRAULIC FEATURES: DILUTION RATIOS
Note: The following dilution ratios should be considered only as an initial reference. Variable factors such
as water flow/pressure, distance of product container to inlet fitting, and product viscosity often require
field adjustments.
Description
Part
code
Flow rate
(gpm)
Plumbing
standard
Dilution (oz/gal)
2
0.5
0.25
Clean on the Go
®
Low-Flow (e-gap)
99093
1
e-gap
Aqua
(0.46mm)
Mint Grn.
(0.41mm)
Clean on the Go
®
Low-Flow (air-gap)
99094
1
air gap
Clean on the Go
®
High-Flow (e-gap)
99095
3.5
e-gap
Orange
(0.63mm)
Brown
(0.58mm)
Yellow
(0.51mm)
Purple
(0.36mm)
Pink
(0.25mm)
Burgundy
(0.21mm)
Clean on the Go
®
High-Flow (air-gap)
99096
3.5
air gap
Accessories
Dilution (oz/gal)
Part code
Unit connector
NA
99097
Rack
NA
99073
Mating caps
NA
914900
Low-Flow Mint Green tip (0.41mm)
2
99115
Low-Flow Aqua tip (0.46mm)
2
99112
High-Flow Orange tip (0.63mm)
2
99109
High-Flow Brown tip (0.58mm)
2
99110
High-Flow Yellow tip (0.51mm)
2
99111
High-Flow Purple tip (0.36mm)
0.5
99113
High-Flow Pink tip (0.25mm)
0.5
99116
High-Flow Burgundy tip (0.21mm)
0.25
99117
The dilution data given are determined under 40 PSI of pressure and 5.28 GPM flow rate. To set a desired
flow rate, a pressure regulator may be needed in cases where flow pressure is excessive. Where the mini-
mum and maximum flow properties are not available, consult a plumber to remedy the situation.
Flow volume needed from the pipe line to reach the optimal flow rate of the venturi:
• Gray venturi 1 GPM nominal flow rate: Needs at least 3.5 – 4 GPM from the pipe line
• Yellow venturi 3.5 – 4 GPM nominal flow rate: Needs at least 7 GPM from the pipe line
Based on water pressure and consistency, and to achieve desired dilution, multiple tip options are provided.
