Please keep the bike, especially the computer console out of direct sunlight to prevent
screen damage.
Please inspect all assembly bolts, nuts, screws, and pedals on the machine for proper
tightness every week.
Storage
Store the bike in a clean and dry environment away from children.
TROUBLESHOOTING
PROBLEM
SOLUTION
There is no display on the computer
console.
1.
Verify the sensor wire that comes from the
computer post is properly plugged into
receptacle located on the back of the
computer.
2.
Check if the batteries are correctly
positioned and battery springs are in
proper contact with batteries.
3.
The batteries in the computer console
may be dead. Replace with new
batteries.
There is no heart rate reading or heart rate
reading is erratic / inconsistent.
1.
Make sure that the wire connection for the
hand pulse sensors is secure.
2.
To ensure the pulse readout is more
precise, please always hold on to the
handlebar grip sensors with two hands
instead of just with one hand only when
you try to test your heart rate figures.
3.
Avoid gripping the hand pulse sensors too
tight. Try to maintain moderate pressure
while holding onto the hand pulse sensors
The bike makes a squeaking noise when in
use.
The bolts may be loose on the bike. Please
inspect all of the bolts and tighten any loose
bolts.
15
Summary of Contents for X-KROSS
Page 1: ...X KROSS ITEM NO 1334...
Page 7: ...OVERVIEW DRAWING 7...
