DESCRIPTION
The camera uses SONY charge coupled device (CCD)
image sensor, and employs digital signal processing
(DSP) chip-set for image control, and all integrated state
circuitry which provides extremely long life and high
reliability. This camera offers excellent image quality, and
is not subject to distortions from magnetic fields. High
resistance to shock and vibration, and easy to install, this
camera is the best choice for your CCTV system.
TRADEMARKS
Sparsh logo is registered trademarks of Samriddhi
Automations Pvt. Ltd.
SONY, SONY Super HAD & SONY Super HAD-II is
registered trademark of Sony Incorporation.
All other brand, product names, and service names are
trademarks or registered trademarks of their respective
companies or organizations
LIMITATION OF LIABILITY
•
This publication is provided “as is” without warranty
of any kind, either express or implied, including but
not limited to, the implied warranties of
merchantability, fitness for any particular purpose, or
non-infringement of the third party’s right.
•
This publication could include technical inaccuracies
or typographical errors. Changes are added to the
information herein, at any time, for the improvements
of the publications and/or the corresponding
product(s).
WARNINGS & CAUTIONS
•
The information provided in the user manual is for the
safety of the customers. Please read the user manual
before operating the product and follow the
instructions provided accordingly.
Warning Messages
•
Do not install under excess hot conditions.
Optimum operational temperature range is 0°C and
+50°C.
•
Do not install under varying light conditions.
Continuously varying light frequency might cause
problems in the normal functioning of the camera.
•
Do not put camera under shocks and jerks.
This may cause the serious disorientation or the
distortion in the components thereby causing the
malfunctioning of the product.
•
Do not install under excess of humid conditions.
This may cause the deposition of water droplets on the
lens and several other sensitive components thereby
lowering the picture quality.
•
Do not expose the camera directly to high light
intensity pulse.
This may damage the CCD or may create dead pixels
in the CCD.
•
Do not expose camera to water.
This may result in malfunctioning of the camera or
may result in the corrosion of certain components due
to minerals contained in water.
•
Do not expose camera to radioactivity.
Radioactive exposure may cause damage to CCD or
may produce dead pixels.
•
Do not attempt to open the camera.
Unauthorized opening of camera is not permissible as
it could cause breakage of the fragile components.
•
Do not use low quality cables and power supply.
Only recommended cables/wires and power supply
should be used for proper functioning of the camera.
If any abnormality occurs, make sure to unplug the
unit and contact your local dealer or our service centre.
INSTALLATION
•
Installation must be carried out by the authorized
personals only.
•
Surface on which the camera is to be mounted must
be strong enough to hold the camera firmly, if not so
reinforce the surface again so that the camera may not
fall off the surface.
All manuals and user guides at all-guides.com