HP10 Series 1-Phase
AC EV Charging Station
User Manual
- 18 -
4
Diagonal plier
Cut the cable
5
Wire stripper
Peeling cables
6
Crimping plier
Pressed cable terminal
7
Cross screwdriver
Fastening screw
5.3.
Power supply system
HP10 series products are suitable for installation in TN power supply system.
a)
TN-S power supply system wiring mode
Fig. 5-3 HP10 work in TN-S system
b)
TN-C power supply system wiring mode
Earth rod should be installed as far as possible to ensure that household electrical equipment
can be effectively protected zero connection. The Fig.5-4 shows the TN-C power supply system
with earth rod.
