HP10 Series 1-Phase
AC EV Charging Station
User Manual
- 9 -
3. STANDARDS COMPLIANCE
3.1.
Charging mode
Conformed to
EN IEC 61851-1:2019
The Charging mode of HP10 series product is Mode 3
3.2.
Charging connection
According to
EN IEC 61851-1:2019
, HP10 series products meet the Case C connection.
Fig. 3-1 Schematic diagram of CASE C connection
Charging mode:
method for connection of an EV to the supply network to supply energy to the vehicle
Mode 3
is a method for the connection of an EV to an AC EV supply equipment permanently
connected to an AC supply network, with a control pilot function that extends from
the AC EV supply equipment to the EV.
Case C:
Connection of an EV to a supply network utilizing a cable and vehicle connector
permanently attached to the EV charging station.
