background image

7

Instruction Manual

EN

 

WaRNiNg:

  Although  exterior  plastic 

parts are highly solvent resistant, NEVER use 

solvents.

charger cleaning Instructions

▪   Dirt  and  grease  may  be  removed  from  the 

exterior of the charger using a cloth or soft non-

metallic brush. Do not use water or any cleaning 

solutions.

 

WaRNiNg:

  Disconnect  the  charger 

from the AC outlet before cleaning.

 

WARNING.

  To  assure  product  safety 

and reliability, repairs, maintenance and adjust

-

ment (including brush inspection and replace

-

ment) should be performed by certified service 

centres or other qualified service organisations, 

always using identical replacement parts.

accEssoRiEs

Recommended  accessories  for  use  with  your 

tool  are  available  at  extra  cost  from  your  local 

SPARKY service centre.

IX - Environmental  

       Protection

The machine, accessories and packaging should 

be sorted for environmental-friendly recycling.

for eU-countries only: 
Do not dispose of the power tool into house

-

hold waste!

 According to the guidelines 91/157/

EEC, power tools, which are not usable, should 

be recycled.  

Batteries: 
Do not dispose of the power tool or the bat

-

tery  into  household  waste,  fire  or  water.

  All 

type of batteries should be sorted for environmen

-

tal-friendly recycling or destroyed. 

for eU-countries only: 

Defective or worn out batteries must be recycled 

according to the guidelines 91/157/EEC. 

To  remove  the  battery  from  the  machine,  make 

sure that the battery is fully discharged. Unscrew 

the screws on the casing and take off the casing 

shell. Disconnect the connections at the battery 

and take out the battery.

X - Warranty

The guarantee period for SPARKY power tools is 

determined in the guarantee card.

Faults due to normal wear, overloading or improp

-

er handling will be excluded from the guarantee.

Faults due to defective materials implemented as 

well as defects in workmanship will be corrected 

free of charge through replacement or repair.

The  complaints  for  defective  SPARKY  power 

tools  will  be  recognized  if  the  machine  is  sent 

back to the dealer or is presented to the author

-

ised warranty service centre undismantled, in its 

initial condition.

Notes

Carefully read the entire Instruction Manual before 

using this product.

The  manufacturer  reserves  the  right  to  make 

changes and improvements to the products and 

to alter specifications without prior notice.
Specifications may differ from country to country.

Summary of Contents for GR 3,6Li










Reviews: