7
Programming / Key-Binding - (PS4, PS3, Xbox One, Xbox 360):
Programming / Key-Binding (Nintendo Switch):
Once setup is complete, simultaneously (at the same time) press “F11 +
F12” on the keyboard. The LED on the adapter will turn BLUE.
Press and hold the button you want to set on the controller, then press
the button on the keyboard or mouse you want to program, then release
the button on the controller to set it.
To program the next button, repeat the above steps (you can program
up to a maximum of 8 buttons)
Press “F11 + F12” again at the same time to complete programming the
buttons.
To restore the controller to default settings: Press and hold "F1 + F10 +
F12" on the keyboard for 5 seconds.
Example:
If you would like to program the "B" button on the controller to the "T" key on your keyboard,
the steps are as follows:
Press and hold “F11 + F12” on the keyboard, wait until the adapter LED is blue and then
release the keys.
Press and hold the "B" button on the controller, do not let go!
Press the "T" key on the keyboard, then release the "B" button on the controller;
To complete, hold down “F11 + F12” on the keyboard then release.
1.
2.
3.
4.
IMPORTANT:
This adapter only supports the official Nintendo Switch Pro Controller. It does not support
other third-party controllers.
The controller must be switched OFF before it is connected to the adapter for setup to
work correctly.
A data cable must be used for connection to the controller. The adapter will not support a
cable with charging function only.