SPARK TIDE USER MANUAL SF-X5
|
A17
CHANGSHA SPARK TECHNOLOGY ELECTRONICS CO.,LTD
www.sparkfabrica.com
5.5.5 SPARK THROUGH REMOTE CONTROLLER
The remote controller can be used after coding when DMX signal is disconnected,or the
function will be broken.
Sparking stops automatically after 30 seconds,and clearing material stops after 5 seconds.
The remote controller has 4 height levels.
One remote controller is recommended to control 4 units at most.
*
Turn on the power,and leave DMX signal disconnected.
*
Hold“
▲
”for 2 seconds in the first interface until the screen shows“Control Pair Remoter 315M“.
*
Press<B>on remote controller until the screen shows”Code Success”,it means the coding is successful.
ON
HEIGHT
CLEAR MATERIAL
OFF/CODE
A
DIGITAL REMOTE
CONTROLLER
B
C
D
