Spark Illuminations Fire-Fly 3 Owner'S Manual Download Page 4

 

 

 

3

 

Important: Keep the battery topped up. 

Expected lifespan of the Lithium-ion cell is 300 or more full 

recharges.. It is better to recharge more often, rather than to use all of the battery’s charge before recharging. 
The self-discharge of the Lithium-Ion battery when not in use is 1%-2% per month. That means, even though 
it has not been used, the charge in the battery will diminish over time. With limited use of the 

Fire~Fly 3

expect to recharge the cell about once per month. Heavier usage may require charging once or twice weekly 
for best results.  
 

NEVER

 use a battery or combination of batteries with a voltage higher than approximately 5.5V with the 

stock FLuPIC module.

 To use higher voltages, a different electronics module is required. These can be 

purchased separately on special order. Please contact us for further information. 
 
 

Replacement Parts: 

 
If any parts ever need to be replaced, the 

Fire~Fly 3

 is modular, so that the emitter and electronics can be 

easily removed and replaced. Due to the design of the 

Fire~Fly 3

,

 the light is easily user-serviceable (a rare 

choice in today’s manufacturing world!). Any parts that are damaged or broken are available as 
replacements.  Heatsinks are available separately if you want to build your own custom module (with your 
choice of emitter and driver boards).  We can also build modules with your choice of board and emitter.  
Please contact us for further information. 

 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for Fire-Fly 3










Reviews: