Sparc S7-2L, Service Manual

Page: 153 / 160

Return the Server to the Normal Operating Position
Related Information
■
“Remove the Top Cover” on page 59
■
“Return the Server to the Normal Operating Position” on page 153
Return the Server to the Normal Operating Position
Caution -
The chassis is heavy. To avoid personal injury, use two people to lift the server and
set it in the rack.
1. Release the slide rails from the fully extended position by pushing the release
tabs on the side of each rail.
2. While pushing on the release tabs, slowly push the server into the rack.
Ensure that the cables do not get in the way.
3. Reconnect the cables to the rear of the server.
Returning the Server to Operation 153