INS_ULTIMA_Harness_2018695
31/03/2022
Page 6 of 10
ULTIMA
-
X Harness
Product Use
HARNESS FITTING
Loosen the webbing at the shoulders, legs and chest
adjustment buckles and put the harness on across the
shoulders (1)
Ensure that the sub-pelvic support strap is positioned
underneath the buttock then fasten the buckles at the
leg loops and coarse adjust the webbing to fit (2 & 3).
Check that the webbing is not twisted.
Connect the buckle at the chest and coarse adjust the
shoulder webbing to fit (4).Check that the webbing is
not twisted.
Adjust the length of the chest web to provide a com-
fortable but snug fit
Tighten the webbing at the legs and shoulders equally
to provide a comfortable but snug fit. If the harness fit
is uncomfortable loosen off the webbing and adjust
again until the desired fitting is achieved.
Stow any loose webbing under the provided elasticat-
ed web tidies.
WARNING! FAILURE TO ADJUST THE HARNESS TO A
COMFORTABLY SNUG FIT MAY RESULT IN SERIOUS
DISCOMFORT OR INJURY IN A FALL ARREST EVENT.
THE HARNESS IS DESIGNED TO PROVIDE PERSONAL
PROTECTION FOR WORKERS AT HEIGHT AND
WORKS BEST WHEN FITTED AS TIGHTLY AS COM-
FORT WILL ALLOW
1
2
3
4