Vinyl Steam Remover
Instruction sheet
n
Fill the reservoir with plain water / Do not fill above the miximum level indicator (5L)
o
Screw the tube into the reservoir
p
Attach the other end of the tube to the handle (don't forget to put the slip cover over the steam-plate)
q
Plug in the power cord and let the water heat up (10 - 15 minutes for a full reservoir)
r
Make sure that the reservoir is horizontally level
s
Take the handle and hold the steam-plate on the surface moving it left to right or top to bottom
t
Remove the vinyl from the surface by hand
Ö
If the vinyl does not come off smoothly; go over the surface again with the steam-plate
w
You can work for approximately
8
0 minutes with a full reservoir
Reservoir
Steam hose
Handle
Steam-plate