Information concerning the EC Declaration of Conformity and the EC Declaration of Incorporation
page 4
EN
Information concerning the EC Declaration of Conformity and the EC Declaration of
Incorporation
For the product(s) designated below:
Centrifugal pump
Product line:
PXA… / PXK…
SKF herewith certifies that it conforms to the perti-
nent safety requirements set forth in the following
Council Directive(s) for the harmonisation of the
laws of the Member States...
•
Machinery Directive 2006/42/EC
•
Low-voltage Directive 2006/95/EC
•
Electromagnetic compatibility 2004/108/EC
Notes:
(a)
This declaration certifies conformity with the
aforementioned directive(s), but does not
contain any assurance of properties.
(b)
The safety instructions in the documentation
included with the product must be observed.
(c)
The certified product must not be started up
until it is assured that the machine, vehicle or
the like in which the product was installed
meets the provisions and requirements of the
national directives to be applied. This is in par-
ticular important for the implementation of the
Use of Work Directive.
(d)
Operation of the products on non-standard
mains voltage as well as nonobservance of in-
stallation instructions can affect the EMC
properties and electrical safety.
SKF further declare that the above mentioned
product:
•
is meant for integration into a machine / for
connection to other machinery according to
the
EC-Machinery Directive 2006/42/EC,
Appendix II Part B
. Starting up the product
is not admissible until it is assured that the
machine, vehicle or the like in which the
product was installed meets the provisions
and requirements of the regulations set forth
in the EC Directive 2006/42/EC.
•
with reference to the
EC Directive 97/23/EC
concerning apparatus subjected to
pressure
this product must only be used as
intended and according to the notes in the
documentation. Especially observe the
following:
Products of SKF Lubrication Systems Germany AG
must not be used in con¬junction with fluids, group
I (hazardous flu¬ids), according to the definition of
article 2 paragraph 2 of the Directive 67/548/EC
dtd. 27th June, 1967; and are not approved for
application with such.
None of the products manufactured by SKF Lu-
brication Systems Germany AG are approved for
application in con¬nection with gases, liquefied
gases, gases dissolved under pressure, steams or
fluids that will reach a steam pressure of more
than 0.5 bar above the normal atmospheric
pres¬sure (1013 mbar) in the admissible ap-
plica¬tion temperature range.
When used as intended, the products sup¬plied by
SKF Lubrication Systems Germany AG do not
reach the limit values listed in the Article 3 par. 1,
sections 1.1 to 1.3 and par. 2 of the Pressure
Equipment Directive 97/23/EC. Therefore they do
not come under the requirements set forth in
annex I of that Directive. They are not labelled with
the CE mark with reference to the Directive
97/23/EC. They are classified by us to come under
Article 3 par. 3 of the Direc¬tive.
The EC Declaration of Conformity and EC-Declara-
tion of Incorporation is part of the product docu-
mentation. These documents are delivered with
the product.
