![Spagna Vetro SV400 SERIES Installation Manual And User'S Manual Download Page 18](http://html.mh-extra.com/html/spagna-vetro/sv400-series/sv400-series_installation-manual-and-users-manual_1339239018.webp)
Page 17
Specifications
*
:
Body
Stainless Steel / Tempered Glass
Power Rating
120V/60Hz (USA & Canada standard)
General Input Power
120W(Motor) + 2 x 20W (Lights)= 160W
Motor Input Power
120 W
Motor Revolution
600 RPM (±10%) to 1400 RPM (±10%)
Levels Of Speed Control
3 Levels
Airflow (CFM)
600 CFM on max speed (200 / 400 / 600CFM)
Air Pressure
120 Pa (170 Pa Maximum)
Noise Level (Sone)
Approximately 0.8 to 6.5 (Lowest to highest Speed)
Motor Type
Single Chamber Ultra Quiet
Fan Type
Centrifugal / Sirocco
Control Type
3 Spd Mechinical , 3 speed electronic
Filtration Type
Aluminum Filters
Illumination
20W(J4) 12V / LED 12V / 35W(GU10) 110V.
Venting Size
Top, 6 inches Round
Interference Protection
Radio Frequency Interference Protected
Specifications
Use and Care Information
Operations:
•
Read and understand all instructions and warnings in this manual before operating the appliance. Save these
instructions for future reference.
•
Always leave safety grills and filters in place. Without these components, operating blowers could catch on to
hair, fingers and loose clothing.
•
NEVER dispose cigarette ashes, ignitable substances, or any foreign objects into blowers.
•
NEVER leave cooking unattended. When frying, oil in the pan can easily overheat and catch fire. The risk of
self combustion is higher when the oil has been used several times.
•
NEVER cook on “open” flames under the range hood. Check deep-fryers during use: Superheated oil may be
flammable.
Cleaning:
•
The saturation of greasy residue in the blower and filters may cause increased inflammability. Keep unit clean
and free of grease and residue build-up at all times to prevent possible fires.
•
Filters must be cleaned periodically and free from accumulation of cooking residue (see
cleaning instructions
on Page 22). Old and worn filters must be replaced immediately.
•
Do not operate blowers when filters are removed. Never disassemble parts to clean without proper instruc
-
tions. Disassembly is recommended to be performed by qualified personnel only. Read and understand all
instructions and warnings in this manual before proceeding.
* Subject to change without notice, please contact your local reseller for details.