Figure 8
Figure 7
Page 11
Installation
(Continued)
Figure 6
Figure 9
Store excess wires in the wiring box.
5.
Drop oil tunnel into recess support near rear of hood. Refer to Figure 8.
6.
To install baffle filters and stainless spacer(s), refer to
7.
Baffle Filters and Stainless Steel Spacers
on Page 18 for
baffle filter and stainless spacer placement. Refer to Figure 9 for the following five steps:
Angle baffle filter toward back of hood.
Push baffle filter up until almost level.
Slide forward into recess behind the front of hood.
Lower baffle filter.
Slide back until it fits into resting positions.
Repeat Step 7 to install all baffle filters and stainless spacers.
8.
Turn powe ON in control panel. Check all lights and fan operations.
9.
Make sure to leave this Installation Guide for the homeowner.
10.
Summary of Contents for PS13
Page 2: ......
Page 19: ...Page 17 Overall PS61 PS63 Overall PS65 ...
Page 21: ...Page 19 Circuit Diagram ...
