Range Hood Operations
(Continued)
Page 13
Control Panel Layout and Buttons Configurations:
During this 3-minutes delay, changing speeds will not affect the countdown.
•
Immediate Power-off
While the fans are in 3-minute power-off delay mode, press the
•
Power Control (On/Off) button once to
turn OFF the fans immediately.
When the fans are operating in normal mode (LED Speed Indicator not flashing), press the
•
Power Control
(On/Off) twice to turn OFF the fans.
Light Control:
Light Control button operates independently from the Power Control (On/Off) and power-off delay function.
Pressing the Power Control (On/Off) button or activating the delay function will not turn halogen lights ON or
OFF. The lights have three settings: High, Low and OFF.
CAUTION: DO NOT touch the lights until switched OFF
and cooled.
While the halogen lights are OFF, press the Light Control button once to turn halogen lights ON at High
•
intensity. LED Light Indicator will light up.
Touch the Light Control button again will change the light intensity to Low.
•
Each touch of the Light Control button will cycle the light intensity through High, Low, and OFF.
•
Heating Lamp Control:
Heating lamps sold separately (120-Volt, 250-Watt maximum). Heating lamps operates independently from the
electronic controls. Pressing the Power Control (On/Off) button, Light Control buton or activating the delay func-
tion will not affect the heating lamps. Heating lamps control rocket switch located at the right side next to the
halogen light.
CAUTION: DO NOT touch the heating lamps until switched OFF and cooled.
To turn ON the heating lamps, switch the control to ON position.
•
To turn OFF the heating lamps, switch the control to OFF position.
•
Decrease
Speed
Increase
Speed
Power Control
(On/Off)
LED Speed
Indicators
Light Control
LED Light
Indicator
