Spagna Vetro 168 Series, Installation Manual And User'S Manual

Page: 13 / 32

Duct Set
Page 11
Find an optimal location for the Air Diverter. The air diverter 4. must be placed directly above and align
with the two body hooks, see Figure 4. Drill four more holes with diameter not exceeding 5/8” and in -
sert four toggle bolts. Secure the air diverter with four 4mm x 16mm Tapping Screws as shown in Fig -
ure 4. Be sure to use appropriate anchors for your wall. Use four sets of 5mm x 16mm Screw with
Washer to install the body hooks onto the hood. Then hang the hood on the wall and tighten the screws.
CAUTION: MAKE SURE the range hood is secure before releasing!
Figure 4
Install Aluminum Duct Tube as shown in Figure 5A. In - 5.
stallation of charcoal filter during this step is also recom -
mended, please see
Charcoal Filter Installation
on Page
8.
Figure 5B
Figure 5A
Air Divertor
Safety Filter
Charcoal
Filter
Installation
(Continued)
If Recirculating (Non-Vented) Kit is NOT purchased, please go back to step 2 on Page 10.
WARNING
Excessive Weight
Require three or more person to move and
install this range hood. Spinal or other bodi-
ly injuries could occur if it is not followed.