Install supporting plate(6)
STEP4
Install(6)&(2)(3), use 5*5 wrench(C) to tighten the screws(A).
STEP5
Install desktop with screw(F), use pistol drill to tighten.
Install baf
fle
(8)
Install(8), use 2.5*2.5 wrench(D) to tighten the screws(E).
将各连接线连接到控制盒(7)
STEP6
Connect All the Cables onto the Control Box(7)
How to use handswitch
Button
UP button
Attention
1. Power supply: AC100V
-
240V,50/60HZ
2. Service Environment: 0-40
℃
3. Unplug the power plug before cleaning, wipe the dust on surface with slight wet dishcloth
when cleaning, be careful not to let the drops into the internal parts, not loose the connector.
4. The electric box contains electronic components, metals, plastics, wires etc., so dispose of
it in accordance with each country's environmental legislation, not the general household
waste.
5. Check carefully to ensure correct and complete assembly before using.
6. Be familiar with all functions and program settings of the product before first use.
7. Children are forbidden to play on the product because of unforeseen action when playing,
so any dangerous consequences caused by this improper action will not be on
8. Slight noise caused by the V-ribbed belt or brake system due to structure will not have any
effect on the use of the equipment.
9. Corrosive or abrasive materials are forbidden to clean the equipment. Must ensure that the
cleaner used will not pollute the environment.
10. Please make sure there is no hazard sources in your operating environment. e.g., do not
litter the tools around. Always be careful to treat the packaging materials in order to avoid any
possible danger, e.g. plastic bag may lead to choking hazard to children.
11.Keep the original package of the equipment if necessary in case of the future use in
transportation.
12.The following tips will help you detected and eliminate the common fault and error. If the
fault you met is not listed below, please contact with your supplier. Only the manufacturer and
professionals are capable for investigating and correcting those fault and error.
Common fault treatment
The following tips will help you detected and eliminate the common fault and error.
If the fault you met is not listed below, please contact with your supplier. Only the
manufacturer and professionals are capable for investigating and correcting
those fault and error.
Waste disposal
This marking indicates that this product should not be disposed with other
household wastes. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To return your used device,
please use the return and c
ystems or contact the retailer where the
product was purchased. They can take this product for environmental safe
recycling.
6
A
x4
C
5x5
C
7
F
E
x2
D
2.5x2.5
A
●
“▲”
Adjust the desk upwards
●
“▼”
Adjust the desk downwards
Instruction
Press the UP button or DOWN button to lift or lower the height
of desk surface.
DOWN button
Fault phenomenon
Method
2.Contact your supplier or dealer
Overwork
(Duty cycle:Max 2min on/30min OFF)
No response while long pressing
down arrow after connected with
a power supply
The desktop could not be lifted
1.Check if overloaded, max loading: 7
0
kg;
2.Contact your supplier or dealer
1.Restart it after suspend for 30mins for the
working time is too long
2.Contact your supplier or dealer
1.Check if all the cables be
connected well
9
1
2
3
1
Use the cable tie(10) t
o fix all the connection
cables on the desk to keep it clean.
10
Install desktop
8
E
D
4
Distance ≤200mm
F
x11
Produced in ChRL for:
DMTrade Mikołaj Tomaszewski
Wiśniowa 36; 64-000 Kościan, Poland
NIP: PL 6981681757
[email protected]
Tel.:
+48 661082052
+48 785082052
