A variety of options exist to secure materials stored on the system.
TouchPad Aisle Access
requires a 4-
digit Personal Identification
Number (PIN) to access a specific
aisle, limiting it only to authorized
individuals. Upon exiting the open
aisle, the user must depress the
“Close” button on the system
module to re-secure the system.
One or all of the carriages may have
this control in place of the standard
or infrared-capable control.
TouchPad System On/Off
is used
in addition to the standard control
and functions as follows. When
placed on a platform, it can be
used to turn the system on and off.
TouchPad Stationary Control
is used in addition to the
standard control and functions in the following ways to create a
stationary carriage within a powered system.
• Install the TouchPad Stationary Control on the extreme
left (or right) carriage. Park the carriages to the right (or
left). Enter the preset code and the system will remain
locked in that configuration (back lighting on the control
will indicate “Stationary Carriage”) until the code is
entered once again, allowing normal operation to resume.
• Install the TouchPad Stationery Control on any carriage
within the system. Park that carriage in the desired
location. Enter the preset code and the carriage will remain
locked in that position (back lighting on that control will
indicate “Stationary Carriage”) until the code is entered
once again, allowing normal operation to resume.
In all these situations, a 4-digit PIN is required. The following
procedure allows you to program the TouchPad control with
your own 4-digit code. This programming must take place
within a 10-second interval. NOTE: The factory-default code
is 1-2-3-4.
To change the 4-digit PIN;
1. Press the “#” key, then press the “*” key. The green
LED will being to blink.
2. Enter in the
current
code within the 10 seconds allotted.
Once the current code is entered, the LED will flash red.
3. Enter in the
new
code within the 10 seconds allotted.
4. The solid green LED will return.
Keyed System On/Off
turns the entire system on and off with
a key located above the control.
Security
8
