SPR_INSTRUC_TU_DR_05.2016
www.spacepro.co.uk/instructions-2/
(Repeat on all drawer sides).
(Repeat on all drawer fronts).
PLEASE NOTE THE 3 AND 4 DRAWER TOWER UNIT ARE THE SAME IN CONSTRUCTION. WE HAVE USED THE 3 DRAWER TOWER UNIT AS AN EXAMPLE.
10
11
Page 4 of 6
x2
x4
1
2
3
1– Lay drawer side (J) on a flat surface, insert the base (K) into the groove then hold the back panel (H) in-place. 2– Place the other drawer side (I) over the base and screw into the back panel (H).
3– Turn the drawer around and screw in panel (J) . (Repeat on all drawers).
12
Drawer back
Drawer
back
Drawer
base
Drawer base
Drawer side
Drawer side
Drawer side
x2
x2
MAKING THE DRAWERS
