SpacePak 2430GH4C Replacement Procedure Download Page 2

 

 

SPL-WG0749 

Instructions 

Note: All screws removed will be replaced in Hardware Kit provided.  
           J-clips will not be provided and must be reused (see below for J-clip orientation).   

 

1.

 

Remove (E) TOP PANEL ASSEMBLY by unscrewing TWELVE* (A) #8 – 3/8” Screws and TWO (D) #10 - 3/8” Screws. Remove FOUR J-CLIPS 

from the Top Panel and save for reassembly. 

2.

 

Remove (F) REAR PANEL ASSEMBLY by unscrewing FOUR (B) #8 -3/4” Screws. 

3.

 

Remove (J) SUPPLY PANEL ASSEMBLY by unscrewing TWELVE* (A) #8 – 3/8” Screws and FOUR (D) #10 - 3/8” Screws. 

4.

 

Remove (G) COIL ACCESS PANEL ASSEMBLY by unscrewing FOUR (B) #8 -3/4” Screws and FOUR (C) #8 – 1” Screws. 

5.

 

Remove (K) CONTROL BOX ASSEMBLY by unscrewing TWO (A) #8 – 3/8” Screws. 

6.

 

To remove (M) BLOWER ASSEMBLY, first remove TWO (D) #10 – 3/8” Screws located under the (L) MOTOR MOUNT. Slide blower off of 

the motor. 

7.

 

For Model 

4860GH4C only

, replace (L) MOTOR MOUNT with supplied Motor Mount Base P/N 45459-WG0518-11 

8.

 

For Model(s) 

4860GH4C

 & 

4860GH4CT 

replace old blower with replacement Blower Assembly P/N 45W35-WG0727. 

9.

 

For Model(s) 

2430GH4C

 & 

3642GH4C 

replace old blower with replacement Blower Assembly P/N 45473R-0WG0571-01 

 

10.

 

Screw (M) BLOWER ASSEMBLY into place with TWO (D) #10 – 3/8” Screws under the (L) Motor Mount.  

11.

 

Reattach (K) CONTROL BOX ASSEMBLY by using TWO (A) #8 – 3/8” Screws. 

12.

 

Reattach (G) COIL ACCESS PANEL ASSEMBLY by using FOUR (B) #8 -3/4” Screws and FOUR (C) #8 – 1” Screws. 

13.

 

Reattach (J) SUPPLY AIR PANEL ASSEMBLY (Model 

WCS4860GH4C

 replace Supply Air Panel Assembly with P/N 45462-WG0561-14, Model 

ESP4860GH4C 

replace with P/N 45462-WG0547-14) by using TWELVE* (A) #8 – 3/8” Screws and FOUR (D) #10 - 3/8” Screws. 

14.

 

Reattach (F) REAR PANEL ASSEMBLY by using FOUR (B) #8 -3/4” Screws. 

15.

 

Place the FOUR J-CLIPS back onto the Top Panel (Model 

4860GH4CT

 replace Top Panel Assembly with P/N 45462-WG0533-14). Reattach 

(E) Top Panel Assembly by using TWELVE* (A) #8 – 3/8” Screws and TWO (D) #10 - 3/8” Screws. 

 

 

*Model 

4860GH4C

 & 

4860GH4CT

 (A) #8 – 3/8” screw quantities are THIRTEEN. 

 

 

Reviews: