17
Master-slave mode
Master
In LCD display, UP/DOWN select “system setting”, master/slave ON
Slave
In LCD display, UP/DOWN select “system setting”, master/slave OFF, set “DMX
address” as 001
ILDA mode
ILDA signal prior, connect ilda cable, no need any setting. RJ45 connector, connect
our ILDA box, LCD display, UP/DOWN select” system setting”, “EASY ILDA” ON
Maintenance
Maintenance should be performed every 3 month, different period according to the
environment. Use a sponge which is dipped with alcohol, rather than wet cloth or
other chemical liquid, to clean the mirror.
Always disconnect from the power before maintenance .
Warning
Do not look at the light source directly. Power must be disconnected before install
and maintenance.
Declaration
This device has left our premises in absolutely perfect condition. In order to maintain
this condition and to ensure a safe operation, it is absolutely necessary for the user
to follow the safety instructions and the warning note written in his user manual.
We cannot be made liable for damages caused by incorrect installations and
unskilled operation!
