Space Seating Air Grid213-38N1F3, Operating Instructions, Page: 2 / 2

STEP 1 STEP 2
STEP 3
STEP 4 STEP 5
213-38N1F3 / 213-88N1F3 / 213-E37P91F3
Air Grid
®
BACK 2-to-1 SYNCHRO TILT CHAIR
ASSEMBLY INSTRUCTIONS
1
2
7R
8
13
9
10
5
7L
X5
PART QTY
1.
Base . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.
Casters . . . . . . . . . . . . . . . . . . . . . . . . 5
3.
Pneumatic Cylinder . . . . . . . . . . . . . . 1
4.
Seat Plate . . . . . . . . . . . . . . . . . . . . . . 1
5.
Seat Cushion . . . . . . . . . . . . . . . . . . . 1
6.
Back Assembly . . . . . . . . . . . . . . . . . . 1
7.
Arms (7L & 7R) . . . . . . . . . . . . . . . . . . 2
8.
Flat Washers . . . . . . . . . . . . . . . . . . . . 6
9.
Arm Screws . . . . . . . . . . . . . . . . . . . . 6
10.
Seat Plate Screws . . . . . . . . . . . . . . 4
11.
Back Support Screws . . . . . . . . . . . . 3
12.
Back Support (Pre-Installed) . . . . . . 1
13.
Allen Wrench . . . . . . . . . . . . . . . . . . 1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place.
STEP 2 Attach Arms (7L & 7R) to Seat Cushion (5) using three Flat Washers (8) and three Arm Screws (9) for each arm. FULLY TIGHTEN
ALL SCREWS USING ALLEN WRENCH (13).
STEP 3 Attach Seat Plate (4) to Seat Cushion (5) with arrow pointing towards the front of the chair, secure Seat Plate (4) using four Seat Plate
Screws (10). FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (13).
STEP 4 Attach Back Support (12) to rear of Seat Plate (4) using three Back Support Screws (11),
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (13).
STEP 5 Insert Pneumatic Cylinder (3) into Base (1), place the assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
3
4
13
11
12
6
X3
© Office Star Products September 2013
13
X3
X3
X3
X3
8
9
5
4
X4
1