4
3.2. INSTALLATION:
The parts to be used to install the product are provided within the box given to you. Please follow the instructions
given below:
You need to install the hanger piece to the place (wall, column, and beam) where you want to install the
heater.
You may use spirit level
to maintain the straight position of the product. As you determine the place of the
holes where the hanger to be mounted and drill the holes. Then place the plastic plugs to the holes and
mount the hanger by using the screws given to you within the package.
You can adjust the angle of the heater at this stage according to your needs and then you can fix it by
tightening the screws on the hanger.
Please make sure that the electrical connection of the heater is made according to the warnings written
above and the schematics given next page.
The operation of the heater in plugged models is made by plugging and unplugging of the cable to the
socket. It is necessary to add an on/off switch to operate the heater in without plug models. This could be
provided by authorized personnel in your region. It is also possible to use a thermostat and/or a dimmer as
an option. Please apply to your local representative or service for this inquiry.
Do not install the plugged models right underneath the wall plug.
E
L