SPACE HD MOD-HDMI-Q Operation Manual Download Page 2

HELPLINE 0861 40 41 42 • www.spacetv.co.za

MOD-HDMI-Q : Operation Manual 1v0

IMPORTANT SAFETY PRECAUTIONS INFORMATION

READ THE FOLLOWING WARNINGS BEFORE YOU USE YOUR DEVICE

1. WARNING

The following safety precautions must be observed to prevent fire or electric shock 
hazard. Safety precautions include but are not restricted to the following:

POWER SUPPLY / MAINS CORD

•   Operate the unit only within the voltage range defined as appropriate by the 

manufacturer. 

•  Occasionally check the power connector and remove dirt or dust that may have 

accumulated.

•  Use only the mains cord that comes with your unit.
•  Do not operate the unit or plug in the mains cord if it is broken, split, or damaged in 

any way.

•  Do not place the mains cord next to heating devices. Do not pull it, place heavy 

objects on it or damage it in any way. Keep it out of reach of children.

•  Ensure that the device is plugged in a properly grounded socket. Insufficient 

grounding may cause electrocution.

•  Always carefully disconnect all plugs by pulling on the plug and not on the cord. 

Make sure the unit’s power switch is turned off before removing the cord from an 
outlet.

•  Disconnect the mains cord when the unit is not in use for long periods of time or 

during storms.

•  Do not connect the unit to a multiple-outlet to avoid plug overheating.

DISASSEMBLING

•   This unit contains parts that cannot be repaired by the user. Do not disassemble or 

try to repair it as this will void all warranties. Please contact the manufacturer if you 

experience any problems with your unit.

WATER/HUMIDITY

•   Do not keep the unit in a humid place or near water.
•  Do not plug/unplug the unit with wet hands.

FIRE

•   Never place a candle or another source of fire on the unit as it may fall and start a fire.
•  If the mains cord or the power connector is damaged or destroyed, or if there is a 

sudden loss of picture during operation, or if you notice a strange smell or there is 
smoke, immediately switch the unit off, disconnect the mains cord and contact the 

manufacturer’s technical support department.

Summary of Contents for MOD-HDMI-Q

















Reviews: