6
SPASIDE CONTROL OPERATION
Pump 1
- Press o nce to turn on low speed. Press a second time to turn pump to high
(with a dual-speed pump). A third time turns pump off.
The “Pump 1” indicator lights up when Pump 1 is on. With dual-speed pump, indicator
will fl ash when Pump 1 is on at low speed.
speed
Light
- Press once to turn light on. Press Light key a second time to turn light off.
The “Light” indicator lights up when light is on.
Temp Up
- Use Up key to raise the temperature Set Point. The temperature setting will
be displayed for 5 seconds to confirm your new selection.
Temp Down
- Use Up key to lower the temperature Set Point. The temperature setting
will be displayed for 5 seconds to confirm your new selection.
up when Pump 2 is on.
The “Pump 2” indicator lights
Blower key
-
Press Blower key to turn blower on. Press Blower Key again to turn
off.
The “ blower ” indicator lights up
when Blower is on.
The "Set Point" icon indicates that the display shows the
NOT the current water temperature!
desired temperature,
The "Set Point" icon indicates that the display shows the
NOT the current water temperature!
desired temperature,
Pump 1
Indicator
Pump 2
Indicator
Blower
Indicator
Light
Indicator
Filtration
Indicator
Heater
Indicator
Pump 1 Pump 2
Blower
Light
Power
Program Temp Up Temp Dwn
Pump2
-
Press once to turn on pump on, press a second will turn the pump off
unless
Two speed pump
. Two speed pump functions as Low, High, Off
A built-in timer automatically turns
the pump off after 20 minutes unless manually deactivated
first.
A built-in timer automatically turns
the accessory off after 20 minutes unless manually deactivated
first.
A built-in timer automatically turns
the accessory off after 20 minutes unless manually deactivated
first.
A built-in timer automatically turns
the light off after 2 hours unless manually deactivated first.
