SP01 METRICA HOLLAND BENCH, Assembly Instructions Manual

Page: 13 / 16

© Copyright 2019 SP01 Design.
All rights reserved.
S P Ø 1 D E S I G N . C O M
p. 13
BENCH ASSEMBLY
REMOVE THE BASE FROM ITS PACKAGING.
POSITION THE FELT PADS AS SHOWN ABOVE ONTO THE METAL FRAME. MAKE SURE THAT NO FELT PAD
COVERS ANY OF THE HOLES.
KEEP THE SCREWS IN A SECURE PLACE, YOU WILL NEED THEM FOR THE FINAL ASSEMBLY STEP.
IN THE MIDDLE OF ONE OF THE LONG RAILS YOU FIND THE SP01 LOGO. THIS WILL BE YOUR BACK SIDE
OF THE BENCH LATER.
HOLLAND BENCH
WITHOUT BACKREST
SP01 LOGO