3
Technical Specifications
• Emitter: Chip On Board (COB) Light Emitting Diode (LED)
• Flood light: 100 / 350 / 700 Lumen
• Runtime: 13 / 4 / 2 Hours
• Dimensions: Length 93mm, Width 88.5mm, Height 30 mm
• Weight: 250g
• Battery Voltage: 3.7v (Lithium Ion)
• Charging Input voltage: 5v DC (via USB cable supplied)
• Charging Time: 4 Hour
• Working Environment: Dry, Non Flammable, less than 50
• Maximum Operating Temperature: 50°C
Operating Instructions
POWER BUTTON
: 1
st
Press -
ON (Eco 100L)
2
nd
Press -
ON (Normal 350L)
3
rd
Press -
ON (Full Power 700L)
4
th
Press -
OFF
Note
: Power switch memory - any mode used for more than 5 seconds is set as default for next
power on.
MAGNETIC Clip
: on 360 -degree swivel mount
CABLE
: Connects torch to USB port for charging
Charge the torch before use:
• Connect the cable (supplied) to any suitable USB port. USB ports from your,
computer, phone charger, vehicle or portable power supplies can all be used to
charge this torch. (Charging time: 4 Hours)
• When fully charged the LED on the base of the torch will change colour from red
to green, indicating that the battery is fully charged.
• Disconnect the cable and the torch is ready for use.
Cleaning and Maintenance
• Keep your light dry, clean and free from oil, water and grease.
• Use a mild detergent on a clean cloth to clean the outside of the tool, when
necessary.
• Store in cool location, (high temp will reduce battery life).
Disposal & Recycling Information
When the tool reaches its end of life, take it to a collection point designated by local authorities
for E-waste.
The separate collection and recycling of your product at the time of disposal will
help conserve natural resources and ensure that it is recycled in a manner that
protects human health and the environment.
