3
Operating instructions
Charging
Lift the weather proof rubber flap at the magnetic end of the main body.
Connect the USB-C cable end (smallest end) into the main unit, then connect the larger USB
cable end to any suitable USB outlet. This could be, your computer, vehicle, phone charger or
portable power bank, etc.
Once connected the battery charge indicator lights will illuminate and show the charge level.
When fully charged all 4 lights will show solid.
Be sure to reinsert the weather cover before taking the unit into any wet, or dirty
environments.
Bluetooth connection
First ensure your phone or other Bluetooth enabled device has its Bluetooth turned on (see
Settings).
Then press and hold the centre button (for 3 seconds), on end of main body.
The unit will respond with the words “Power on, Bluetooth” then shortly afterwards
“Bluetooth connected”. The initial paring may not occur automatically. In which case open
the Bluetooth on your device and manually select the device connection. Once paired it will
automatically connect whenever the Speaker is powered on.
On unit the volume can be adjusted by the + or – buttons and track selection made via the
forward and reverse buttons.
To turn off press and hold the centre button (for 3 seconds), the unit will respond with the
words “Power Off”
Light Operation
The ON / OFF button for the light is located adjacent to the COB LED’s
Warning:
Do not look at the LED’s, face the unit away from you and press the button once to
turn ON Low lighting, press the button once again for High lighting and a third time to turn the
light OFF.
