11
6. Connection to Computer
Connect to the computer by the USB cable, the instrument will auto power on.
Copy and Deletion is available by computer operation, while buttons of the instrument are
locked until the USB cable is disconnected.
Meanwhile, LCD displays USB icon for 2s and then the LCD automatically turns off.
The LCD lights up again when USB cable is disconnected or charging is completed.
Note:
Connect by the USB cable under any mode of Power off , System Setup main
menu, any submenu or camera interface, the instrument will be connected to PC.
7. Charging
Connect to DC5V/1A charger, the instrument is auto-on and enters into System Setup
interface with a battery icon flickering on the top right corner indicating battery charging.
The icon will stop flickering when charging is completed.
All the buttons are locked and remain unavailable while battery charging.
Disconnecting the USB cable will release the buttons.
8. Reset function
If the system halts unexpectedly, please press the RESET button on the left-side of the
instrument, it will be reset. Instrument can be operated normally once power is on again.
9. Warning
The gooseneck should not be bended to a diameter less than 5inch’s, or it will be
damaged.
Take out the battery when the instrument is not in use for a long time to avoid corruption
caused by battery fluid leakage.
Clean the camera before operation.
Use 3.7V Li-battery.
To avoid electrical shock, the instrument and gooseneck should not be in contact with high
voltage objects during operation.
To avoid instrument damaged and user injury, the gooseneck cannot be inserted into the
rotational gear wheel.
Summary of Contents for SP70935
Page 4: ...4...
