3
INTRODUCTUCTION
Product Function
The SP61009 Load Tester / System Analyser
Battery Load Test
Uses a fixed resistive load (125 Amps) to quickly and accurately evaluate the battery’s ability
to crank an engine. The tester draws current from the battery while measuring its voltage drop.
The voltage level of a good battery will remain relatively steady under load, but a defective
battery will show a rapid decline in voltage.
Charging Voltage Test
This test measures the output voltage of the alternator/regulator. Checks diode function and
indicates under or overcharging – which in turn can lead to poor battery performance and or
reduced service life of battery.
Starter Motor Test
This test is used to motor analyse the starter motor. By testing the actual cranking current
and cranking voltage of the starter motor, it is possible to determine starter motor condition.
Excessive current draw makes starting difficult and shortens battery life.
Technical Parameters
•
Measurement Range:
•
Voltage Range:
9-15V DC
If you try to test a battery with less than 12 volts, there will appear “- L-” in digital
display. This means you should charge the battery before testing.
Technical Specifications
1. Display: LED 3 digit display
2. Power provided when connected to battery
3. Dimensions: Length 300mm, Width 165mm, Height 67mm
4. Weight: 1.3Kg
5. Voltage Tolerance:
9 -15V DC
(for 12v batteries only)
6. Working Environment Temp.: -20°C-60°C
Measure Standard
Measure Range
CCA
300 – 999 (1000)
