SP Controls Application Note
PLUS U2-1200
Revision B
Finding the USB connector for the PLUS adapter cable can be difficult as it is hidden beneath a sticker. In
order to remove this sticker follow these instructions.
To Remove Sticker:
1. Take a flat head screwdriver and place underneath the seal of the S-Video connector. (See Figure 2)
2. Gently lift up with the screwdriver to remove the sticker from the back of the projector. (See Figure 3)
3. Remove the sticker completely to reveal the hidden connector. (See Figure 4)
4. Connect the PLUS serial adapter cable (P/N: YCB-C-769760000) into the USB connector (See Figure
5)
© 2004-9 SP Controls Inc.
SP Controls reserves the right to modify specifications without notice at any time.
Figure 1: This is the back of the PLUS
projector before removing the sticker
Figure 2: Use a Flat head screwdriver to
help pry the sticker off
Figure 3: Continue removing the sticker
until it is completely removed
Figure 4: Once the sticker is removed the
USB connector will be visible
Figure 5: The USB connector to the right of
the audio connector is used to control this
projector