background image

SOYO™

 

SY-P4VGM V1.0 Motherboard 

mPGA Socket 478 Processor supported 

VIA P4M266A AGP/PCI/CNR Motherboard 

533/400 Front Side Bus supported 

Micro ATX Form Factor 

 

Copyright © 2004 by SOYO Computer Inc. 

Trademarks:

  

SOYO is a registered trademark of SOYO Computer Inc. All trademarks are properties of 

their owners. 

Product Rights:

  

All names of the product and corporate mentioned in this publication are used for 

identification purposes only. The registered trademarks and copyrights belong to their 

respective companies. 

Copyright Notice:

  

All rights reserved. This manual has been copyrighted by SOYO Computer Inc. No part of 

this manual may be reproduced, transmitted, transcribed, translated into any other language, 

or stored in a retrieval system, in any form or by any means, such as by electronic, 

mechanical, magnetic, optical, chemical, manual or otherwise, without permission in 

writing from SOYO Computer Inc. 

Disclaimer:

  

SOYO Computer Inc. makes no representations or warranties regarding the contents of this 

manual. We reserve the right to amend the manual or revise the specifications of the product 

described in it from time to time without obligation to notify any person of such revision or 

amend. The information contained in this manual is provided to our customers for general 

use.  Customers should be aware that the personal computer field is subject to many patents. 

All of our customers should ensure that their use of our products does not infringe upon any 

patents. It is the policy of SOYO Computer Inc. to respect the valid patent rights of third 

parties and not to infringe upon or to cause others to infringe upon such rights. 

Disclaimer: 

Please be advised that some SOYO motherboards are designed with overclocking features 

and may allow users to run the components beyond manufacturer's recommended 

specifications. Overclocking beyond manufacturer's specifications is not recommended nor 

endorsed by SOYO, Inc. and will void your manufacturer's warranty. Overclocking beyond 

manufacturer's specifications is not encouraged and should be assumed at the user's own 

risk. Unsafe overclocking can damage the user's system or cause serious personal injury. 

If the user is unsure or in doubt about overclocking, please seek professional advise. SOYO, 

Inc. is not responsible for any direct or indirect damage resulting from overclocking. 

Restricted Rights Legend:

  

Use, duplication, or disclosure by the Government is subject to restrictions set forth in 

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at 

252.277-7013. 

About This Guide:

  

This Quick Start Guide can help system manufacturers and end users in setting up and 

installing the motherboard. Information in this guide has been carefully checked for 

reliability; however, to the correctness of the contents there is no guarantee given. The 

information in this document is subject to amend without notice. 

For further information, please visit our 

Web Site

 on the Internet. The address is 

"http://www.soyo.com.tw". 

P4VGM V1.0 Series - Version 1.0- Edition: March 2004 

* These specifications are subject to amend without notice

 

Summary of Contents for SY-P4VGM V1.0




























Reviews: