background image

SY-K7VMP 

Quick Start Guide

 

 

21

 

Th

e S

O

Y

O

 C

D

 

Step 2. 

Install Drivers and Utilities 

Click the 

Install Drivers

 button to display the list of drivers software that can be installed 

with your motherboard. The Start Up program displays the drivers available for the 
particular model of motherboard you own. We recommend that you only install those 
drivers. 

 

 (Driver Installation Menu) 

A short description of all available drivers follows: 

 

VIA 4 in 1 Driver Package for Win 9x/ME/NT/2k/XP 

VIA 4 In 1 driver includes four system drivers to improve the performance and maintain 
the stability of systems using VIA chipsets. These four drivers are: 

VIA Registry (INF) Driver, VIA AGP VxD driver, VIA ATAPI Vendor Support Driver and 
VIA PCI IRQ Miniport Driver.  

 

VIA KM400 Onboard Display Driver for Win 9x/ME/NT/2k/XP 

This program will install the driver for the VIA Onboard Display adapter. Note that for Windows NT the 
driver installation should be done manually. Check the ReadMe included with the driver installation for 
more details. 

 

VIA Audio driver setup program for Win   9x/ME/2000/NT/XP 

This driver supports 2/4/6 speakers with 3D stereo enhancement. 

 

VIA USB2.0 Driver for Win 98/98SE/ME/2K 

This setup program will install the driver for VIA USB 2.0 Host Controller for Windows 
98SE and Windows ME. For Windows XP, please check Chapter 6. 

Summary of Contents for SY-K7VMP



































Reviews: