Hardware Installation
SY-7IWM-X
44
Step 3.
Select [Frequency Control]
Move the cursor to the
[CPU Frequency]
field to set the CPU frequency.
The following table shows all available [CPU Frequency] settings on your
SY-7IWM-X Motherboard . If you set this field to [Manual], you will be
required to fill in the next two consecutive fields: (1) the CPU Host/PCI
Clock, and (2) the CPU Ratio.
CPU Frequency (MHz)
667MHz (66 x 10.0)
850MHz (100 x 8.5)
Manual
700MHz (66 x 10.5)
600MHz (133 x 4.5)
400MHz (66 x 6.0)
500MHz (100 x 5.0)
666MHz (133 x 5.0)
433MHz (66 x 6.5)
550MHz (100 x 5.5)
733MHz (133 x 5.5)
466MHz (66 x 7.0)
600MHz (100 x 6.0)
800MHz (133 x 6.0)
500MHz (66 x 7.5)
650MHz (100 x 6.5)
866MHz (133 x 6.5)
533MHz (66 x 8.0)
700MHz (100 x 7.0)
933MHz (133 x 7.0)
566MHz (66 x 8.5)
750MHz (100 x 7.5)
1000MHz (133 x 7.5)
600MHz (66 x 9.0)
750MHz (100 x 7.5)
1.13GHz (133 x 8.5)
633MHz (66 x 9.5)
800MHz (100 x 8.0)
Select the working frequency of your Pentium
®
III, Celeron
processor among these preset values.
Note:
Mark the checkbox that corresponds to the working frequency of your Pentium
®
III,
Celeron
processor in case the CMOS configuration should be lost.
Step 4.
Select [Save & Exit Setup]
Press
<Enter>
to save the new configuration to the CMOS memory, and
continue the boot sequence.
Summary of Contents for SY-7IWM-X
Page 96: ...SY 7IWM X 92...
